NTC Adsl Setup Setting

Nepal Telecom is one of the leading institution to provide newest technology to Nepali people and with the introduction of ADSL service it has leapfrogged all possible competitors of Internet service providers. Dial up internet is a thing of past. The best technology of world with the chepest price has arrived to Nepal and it is expanding to every part of Nepal.



But you might be confused to configure the internet and router settings. so here is a basic guide to configure the internet in your computer.


Step 1: Getting the service
Make sure ADSL service is available in your area and your house is within 5 km radius of the nearest Nepal telecom’s exchange.
After conforming it get the adsl service by filling of the application form which is available for download at ntc’s site or it will be better to go to the nearest NTC’s office and fill up the form. You will be charged Rs.500 for registration and you have to pay the charge of first month. i.e. Rs.904. So you have to pay Rs. 1404 in total.

Step 2: Connecting the router
The most important thing comes here. Your internet speed depends on how you have connected your router and other telephone sets.
The router should be at the first point of your telephone line. No telephone sets should be connected before it. Seems confusing look the diagram below.


ll— main telephone line
ll
ll
---------------------
l ADSL SPLITTER l
---------------------
ll
ll--------------------
--------lll
l Router l --------  ----------------  ----------------
---------l Extension 1 l l Extension 2 l l Extension 3 l
---------- --------------- ------------------ --------------
 
Step 3: Entering the router configuration Page
goto the router administration page. You can get the details on your router manual.for most of the router address is 192.168.1.1
type this address in your browser and if you have connected router properly then you will be asked username and password. This username and password is not the ADSL username and password but it the username and password of you router. You can get it from router manual. For most of the router the values are
username: admin
password: admin

Step 4: Creating the internet connection
- Go to Advance Settings and then WAP
- Click the add button
- then enter following values wherever necessary

VPI — 8
VCI — 81

encapsulation — PPPOE/LLC
Authentication — Auto

Username — Provided by NT
Password — Provided by NT

Enable quality of service: yes
IGP Multicast: yes

Step 5: You are done
Now you can access high speed broadband internet in your computer.

This guide includes basic ideas for most of the adsl modem (routers) available in the market.