Install Windows XP using USB Flash Disk/ Flash Drive - Step by Step Guide Part 2

Now the rest steps are below

step 7:

now type this cd..andpress Enter

then type cd usb_prep8 and press Enter

type usb_prep8 again... and pres Enter

step 8:

Your command prompt window will look like this

Press any key to continue...

usb_prep8 welcome screen will appear

Prepares Windows XP LocalSource for Copy to USB-Drive:

0) Change Type of USB-Drive, currently [USB-stick]

1) Change XP Setup Source Path, currently []

2) Change Virtual TempDrive, currently [T:]

3) Change Target USB-Drive Letter, currently []

4) Make New Tempimage with XP LocalSource and Copy to USB-Drive

5) Use Existing Tempimage with XP LocalSource and Copy to USB-Drive

F) Change Log File - Simple OR Extended, currently [Simple]

Q) Quit

Enter your choice:_

now, insert your original Windows XP CD, or Windows XP with sata ahci driver to your CD/DVD ROM

and back to Command Prompt window

type 1 then press Enter...
"Browse For Folder" window will appear, select your CD/DVD drive and click OK

the result... "XP Setup Source Path" changed to G:\(yours may be different)

now for point 2, if letter T is currently assigned to a drive in your computer, you must change it.... if not, leave it as it is

how to change it?
type 2 and press Enter...

"Enter Available Virtual DriveLetter"

for example you doesn't have drive S
so you type S and press Enter




back to usb_prep8 welcome screen...
now type 3 and press Enter..

Target USB-Drive Letter e.g type U" Enter Target USB-Drive Letter:

because my Flash drive letter is H

So, type H and press Enter...

after back to usb_prep8 welcome screen...

now type 4 and press Enter to make new temporary image with XP LocalSource and copy it to USB Flash Drive

please wait a few seconds..

"WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE T: WILL BE LOST! Proceed with Format (Y/N)?"

type Y and press Enter

please wait....

when format virtual disk complete, press any key to continue..

please wait... making of LocalSource folder is in progress...

when "Making of LocalSource folder $WIN_NT$.~LS Ready"

Press any key to continue...

"Copy TempDrive Files to USB-Drive in about 15 minutes = Yes OR STOP = End Program = No"

Click Yes, and wait...

"Would you like USB-stick to be preferred Boot Drive U: bla... bla..."

Click Yes

"Would you like to unmount the Virtual Drive ?"

Click Yes, wait a few seconds, and press any key....

press any key again to close usb_prep8...

Now, your USB Flash Drive is ready...